Table of Contents
Advertisement
[1]
Check that all ROLLERS rotate freely.
[2]
Check for broken GEARS. Install new
ROLLERS if necessary.
[3]
Remove dirt and dust from the AIR TUBES.
[4]
Check the SPRINGS, not shown, for wear.
Install new SPRINGS if necessary.
[5]
Check the temperature at the bottom of the
DRYER on the drive side of the processor.
[6]
Rotate the DRYER TEMPERATURE
CONTROL KNOB to adjust the temperature if
necessary. See page 2-21.
The temperature of the DRYER should
be as low as possible for drying the
film.
SPRING
GEAR
3-8
NOTE
ROLLER
Checking the Dryer Rack
Dryer
DRYER
TEMPERATURE
CONTROL
KNOB
AIR TUBE
H112_0089ACD
H112_0089AC
H112_0095BCA
H112_0095BA
981777
Hide quick links:
Advertisement
Table of Contents
