Replacement Of The Detector Switches - Kodak M35 Service Manual

Replacement of the Detector Switches

Dangerous voltage.
[1] Disconnect the main power.
[2] Remove the:
• 2 SCREWS
• 2 LOCK WASHERS
• 2 WASHERS
• WIRE TIES, not shown
[3] Disconnect the SWITCH CABLE from the
ELECTRICAL BOX.
981777
SCREW (2)
DETECTOR
SWITCH
Replacement of the Detector Switch
[4] Connect the new SWITCH CABLE.
[5] Install the:
• new DETECTOR SWITCH
• 2 WASHERS
• 2 LOCK WASHERS
• 2 SCREWS
• new WIRE TIES
[6] Connect the main power.
[7] Do the adjustment procedure if necessary.
See page 2-4.
LOCK WASHER (2)
WASHER (2)
H112_0067BCA
H112_0067BA
2-5