[6]
Install new WORM GEARS or BEARING BLOCKS if necessary.
[7]
Install the DRIVE SHAFT ASSEMBLY
[8]
Place the SHIMS under the BEARING BLOCKS.
[9]
Install the 4 SCREWS in the BEARING BLOCKS.
[10]
Adjust the position of the BEARING BLOCKS until the DRIVE SHAFT moves freely.
[11]
Install the DRIVE CHAIN.
[12]
Adjust the DRIVE CHAIN. See page 2-8.
[13]
Tighten the 4 MOUNTING SCREWS.
[14]
Install the CHAIN GUARD.
2-20
Do not overtighten the 4 SCREWS.
981777