11 Maintenance
11.4 Cleaning the air fi lters
The screws of the fi lter section are very small
and can easily fall down. You should use a
magnetic screw driver.
The inverter has two air fi lters, one on the upper left
side and one on the upper right side.
1.
Remove the 4 screws from each fi lter section.
2.
Pull out the air fi lter section.
3.
Clean the air fi lter with an air blower or a cloth.
4.
Put the air fi lter section into the inverter housing.
98
5.
Fasten each air fi lter section with the four screws.
Installation and Operation Manual for RPI M50A