Ac Connection Type - Delta RPI M50A_120 Installation And Operation Manual

8 Settings

8.10 AC Connection type

Overview
With this function you can set the type of AC connection you use to connect the inverter to the grid. The inverter
can be connected to a 3-wire system (3P3W: L1, L2, L3, PE) or a 4-wire system (3P4W: L1, L2, L3, N, PE). The
default setting is 3P4W.
Accessing the menu
Main menu > Install Settings > AC Connection
1 0 . S e p 2 0 1 4 1 5 : 3 2
S t a t u s : O n G r i d
P o w e r :
E - T o d a y :
I n v e r t e r I n f o .
G e n e r a l S e t t i n g s
I n s t a l l S e t t i n g s
A c t i v e / R e a c t i v e P w r
F R T
E P O : N o r m a l C l o s e
A C C o n n e c t i o n : 3 P 4 W
A n t i - i s l a n d i n g :
M a x . P o w e r :
R e t u r n t o F a c t o r y
Confi gurable Parameters
Parameter
AC Connection
68 68
1.
When the default information is displayed, press any button to open the
main menu. Otherwise, repeatedly press the button
0 W
menu is displayed.
0 k W h
2.
Use the buttons
To confi rm your selection, press the button
3.
The menu is protected by password 5555. Use the buttons
to set each digit.
To confi rm a digit, press the button
4.
Use the buttons
O N
setting is displayed behind the menu entry.
1 0 0 %
5.
To start editing the parameter value, press the button
6.
To change the parameter value, use the buttons
To confi rm your selection, press the button
To cancel the action, press the button
Description
Sets the type of AC connection used to connect the
inverter to the grid.
3P3W: 3-wire system (L1, L2, L3, PE)
3P4W: 4-wire system (L1, L2, L3, N, PE)
and to select Install Settings.
ENT
.
ENT
and to select AC Connection. The current
ENT
.
ESC
Value range
3P3W | 3P4W
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A
until the main
ESC
.
and
.
ENT
and .
.