Inverter Information - Delta RPI M50A_120 Installation And Operation Manual

9.4

Inverter information

Description
In this section you fi nd general information about the inverter.
Accessing the Menu
Main menu > Event log
1 0 . S e p 2 0 1 4 1 5 : 3 2
S t a t u s : O n G r i d
P o w e r :
E - T o d a y :
M e t e r
E n e r g y L o g
E v e n t L o g
I n v e r t e r I n f o .
M e t e r
E n e r g y L o g
E v e n t L o g
I n v e r t e r I n f o .
Displayed Parameters
Parameter
S/N
DSP, Red, Comm, Wifi
ID
Country
Insulation
Baud rate
Install
AC connection
Pmax
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A
1.
When the default information is displayed, press any button to open the
main menu. Otherwise, repeatedly press the button
0 W
menu is displayed.
0 k W h
2.
Use the buttons
To confi rm your selection, press the button
3.
Use the buttons
Description
Serial number.
The software versions of the various controllers.
The currently set inverter ID for RS485. For a description how to change the inverter
ID, see "8.6 Inverter ID", p.
The currently set country/grid.
The currently set insulation resistance in kΩ. For a description how to change the
insulation settings, see "8.7 Insulation mode and insulation resistance", p.
The currently set baud rate for RS485. For a description how to change the baud rate,
see "8.5 Baud rate for RS485", p.
The date of installation.
The currently chosen type of AC connection. For a description how to set a different
type of AC connection, see
The currently set maximum active power that the inverter feeds into the grid. For a
description how to change the maximum active power, see
mum feed-in power)", p.
9 Measurements and statistics
and to select Inverter Info.
and to scroll through the inverter information.
58.
57.
"8.11 AC Connection type", p.
69.
until the main
ESC
.
ENT
59.
68.
"8.12 Max. Power (Maxi-
89 89