Delta RPI M50A_120 Installation And Operation Manual page 71

M o d e :
S e t P o i n t :
M o d e :
S e t P o i n t :
Confi gurable Parameters
Parameter
Mode
Set Point
Do not change this setting without prior
consultation with Delta Solar Support.
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A
6.
O N
To change the mode, use the buttons
1 0 0 %
ton .
ENT
To switch the function on, select ON and press the button
To switch the function off, select OFF and press the button
you switch the function off, you can ignore the following steps.
O N 7.
To set the value for the power limitation, use the buttons
1 0 0 %
to select Set Point and press the button
8.
Use the buttons
To confi rm your setting, press the button
To cancel the action, press the button
Description
Switches the function on and off.
The value for the power limitation.
and
ENT
and To change the parameter value.
ENT
.
ESC
Value range
ON | OFF
Default value: OFF
0 .. 100%
Default value: 100%
8 Settings
and press the but-
.
ENT
. When
ENT
and
71 71