Delta RPI M50A_120 Installation And Operation Manual page 82

8 Settings
Configurable Parameters
Parameter
Mode
V1s
V2s
Qs limit
V1i
V2i
Qi limit
T delay
P lock-in
P lock-out
Do not change this setting without prior
consultation with Delta Solar Support.
82 82
Description
OFF Switches the function on and off.
Curve A
Curve B
The lower voltage limit for feeding-in capacitive reactive power.
The upper voltage limit for feeding-in capacitive reactive power.
The limit for the inductive apparent power. The value is set in per cent of the rated
apparent power S . This value is with parameter V2s.
n
The upper voltage limit for feeding-in inductive reactive power.
The upper voltage limit for feeding-in inductive reactive power.
The limit for the inductive apparent power. The value is set in per cent of the rated
apparent power S . This value is with parameter V2s.
n
Internal parameter
The lower limit of the active power range within which the function is active. The
parameter is given in percent of the nominal power. Used for Italy only.
The upper limit of the active power range within which the function is active. The
parameter is given in percent of the nominal power. Used for Italy only.
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A