Max. Power (Maximum Feed-In Power) - Delta RPI M50A_120 Installation And Operation Manual

8.11 Max. Power (Maximum feed-in power)

Overview
This function should be set only when requested by country regulations, authorities or your grid
operator.
With this function you can limit the maximum active power to be fed into the grid.
Accessing the menu
Main menu > Install Settings > Max. Power
1 0 . S e p 2 0 1 4 1 5 : 3 2
S t a t u s : O n G r i d
P o w e r :
E - T o d a y :
I n v e r t e r I n f o .
G e n e r a l S e t t i n g s
I n s t a l l S e t t i n g s
A c t i v e / R e a c t i v e P w r
F R T
E P O : N o r m a l C l o s e
A C C o n n e c t i o n : 3 P 4 W
A n t i - i s l a n d i n g :
M a x . P o w e r : 5 0 0 0 0 V A
R e t u r n t o F a c t o r y
Confi gurable Parameters
Parameter
Max. Power
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A
1.
When the default information is displayed, press any button to open the
main menu. Otherwise, repeatedly press the button
0 W
menu is displayed.
0 k W h
2.
Use the buttons
To confi rm your selection, press the button
3.
The menu is protected by password 5555. Use the buttons
to set each digit.
To confi rm a digit, press the button
4.
Use the buttons
O N
is displayed behind the menu entry.
5.
To start editing the parameter value, press the button
6.
To change the parameter value, use the buttons
To confi rm your selection, press the button
To cancel the action, press the button
Description
Limits the maximum power to be fed into the grid.
and to select Install Settings.
ENT
.
ENT
and to select Max. Power. The current setting
ENT
.
ESC
Value range
0 .. 55000 VA
Default: according to the coun-
try regulations
8 Settings
until the main
ESC
.
and
.
ENT
and .
.
69 69