Mounting The Inverter - Delta RPI M50A_120 Installation And Operation Manual

6 Installation
6.2

Mounting the inverter

WARNING
Heavy weight
► The inverter must be lifted and car-
ried by at least three people or with
an appropriate lifting equipment.
► Always use the mounting plate
delivered with the inverter.
Read chapter
tion", p. 18
tion.
1.
Attach the mounting plate with 12 M6 screws to
the wall or to your mounting system. Use the ap-
propriate type and number of screws.
2.
Hang the solar inverter onto the mounting plate.
38
"5. Planning the installa-
before you start installa-
3.
Check that the rail of the solar inverter hangs cor-
rectly in the mounting plate.
4.
Check that the bottom of the inverter is fi rmly po-
sitioned against the wall or the mounting system.
Also check that the inverter hangs vertically in all
directions.
Installation and Operation Manual for RPI M50A