Smart Fans Replacement And Filter Cleaning - Delta M100-212 Operation And Installation Manual

Grid-tie transformerless solar inverter
Table of Contents

Advertisement

Maintenance

5.3 Smart Fans Replacement and Filter Cleaning

M100_210 / 212 has one fan tray for power module cooling and two internal fans
for inside air circulation as shown in Figure 5-7 to 5-14.
• Power Module (PM) compartment
• Inside the inverter compartment
Figures 5-8 illustrates the PM fan location.
Figures 5-9, 5-10, 5-11 illustrates the internal fan 1 locations.
Figures 5-12, 5-13, 5-14 illustrates the internal fan 2 locations.
Periodic fan and filter cleaning is required to insure long life and reliability.
- The time period between cleanings depends on the quality of the environment.
- Under normal duty use, Delta recommends smart fans and filters be cleaned
every 4 months
- For very dusty locations, it may be necessary to clean the fans and filters
quarterly or monthly.
The cooling fans feature modular designs that make their removal for cleaning
or replacement a simple task. As a result, the replacement of fans is also smart.
- Prior to beginning any maintenance procedures outside AC breaker and DC switch
off to avoid risk of electrical shock!
ATTENTION
DANGER : ELECTRICAL HAZARD!!
64

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

M100-210

Table of Contents