Delta RPI M50A_120 Installation And Operation Manual page 75

Configurable Parameters
Parameter
Mode
Cos phi
Do not change this setting without prior
consultation with Delta Solar Support.
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A
8.
To change the parameter value, use the buttons
To confirm your setting, press the button
To cancel the action, press the button
Description
Switches the function on and off.
Sets up a cos phi so that the inverter can feed reac-
tive power into the grid.
8 Settings
and .
.
ENT
.
ESC
Value range
ON | OFF
Default value: OFF
ind 0.8 ... cap 0.8
75 75