Baud Rate For Rs485 - Delta RPI M50A_120 Installation And Operation Manual

8.5

Baud rate for RS485

Overview
With this function you can set the baud rate for the RS485 connection.
► If you connect multiple inverters via RS485, set the same baud rate on each inverter.
Accessing the menu
Main menu > General settings > Baud rate
1 0 . S e p 2 0 1 4 1 5 : 3 2
S t a t u s : O n G r i d
P o w e r :
E - T o d a y :
I n v e r t e r I n f o .
G e n e r a l S e t t i n g s
I n s t a l l S e t t i n g s
A c t i v e / R e a c t i v e P w r
F R T
L a n g u a g e
D a t e & T i m e
B a u d r a t e
9 6 0 0
1 9 2 0 0
3 8 4 0 0
Confi gurable Parameters
Parameter
Baud rate
Installation and Operation Manual for RPI M50A Installation and Operation Manual for RPI M50A
1.
When the default information is displayed, press any button to open the
main menu. Otherwise, repeatedly press the button
0 W
menu is displayed.
0 k W h
2.
Use the buttons
To confi rm your selection, press the button
3.
Use the buttons
To confi rm your selection, press the button
4.
Use the buttons
To confi rm your selection, press the button
Description
Sets the baud rate for the RS485
connection.
and to select General Settings.
ENT
and to select Baud rate.
ENT
and to select a baud rate.
ENT
Value range
9600 | 19200 | 38400
8 Settings
until the main
ESC
.
.
.
57 57