Inverter Information; General Settings - Delta RPI M80U Operation And Installation Manual

4.2.5 Inverter Information

This page can helps user to recognize the inverter. First section displays serial
number, installation date, ID, and firmware version. Another 3 sections displays
the settings of inverter functions. For more information about these settings,
please refer to 4.2.7 Install Settings, 4.2.8 Active/Reactive power, and 4.2.9
FRT (Fault ride through).

4.2.6 General Settings

Users can set Language, Date and Time, and RS-485 communication baud rate
in this page.
S/N: RN11179CB0
Install: 11/01/2016
DSP 1.80 Red. 1.65
Comm. 1.65 ID: 002
Country:
IEEE1547 480V
Insulation:
Baud Rate:
AC connection:
Max. Power:
Dry Cont A:
Dry Cont B:
EPO: Normal Close
Grid Settings
►
Active Pwr Settings
React Pwr Settings
► FRT Settings
Figure 4-7 : Inverter information page
Language
►
Date and Time
Baud Rate
Figure 4-8 : General settings page
41
or
ENT
1200 k
19200bps
or
ENT
3P3W
83000VA
Insu.
Insu.
or
ENT
or
ENT
Commissioning