Decommissioning, Disposal; Appendix; Factory Setting - MICRO-EPSILON combiSensor KSH5 Instruction Manual

Decommissioning, Disposal

combiSENSOR
9. Decommissioning, Disposal
Disconnect the power supply and output cables on the controller.
Disconnect the sensor cable between sensor and controller.
The system is produced according to the directive 2002/95/EC („RoHS"). The disposal is
done according to the legal regulations (see directive 2002/96/EC).
10.

Appendix

Accessories and Spare Parts
PC3/8 Power cable, 3 m (9.84 ft) long, 8-wire
SCAC3/5 Analog output cable, 3 m (9.84 ft), 5-wire
PS 2010 Power supply for mounting on DIN-rail, input 230/110 VAC,
output 24 V/2.5 A
Service
Functional and linearity inspection inclusive 11-points illustrated testreport and recalibration.
11.

Factory Setting

- Data rate = 520 Hz
- Filter = Off
- Transmit channels = All
- Trigger mode = Off
- Mathematic functions = Off
Page 51