Table of Contents
Advertisement
Available languages
Available languages
Ethernet Interface
combiSENSOR
Select "Internet Protocol (TCP/IP) > Properties"
By default, the IP address of the controller is set to 192.168.0.2 and the port on 10001. This
can be changed at any time:
- by using the web browser. Enter the current IP address into the address bar. Confirm the
authentification dialog by pressing "OK". You will now enter the configuration menu. You
can change miscellaneous network settings under the item "Network". Amongst others,
the host name for the device can also be changed and the DHCP service can be activa-
ted.
- by using the "Lantronix Device Installer" software.
Page 42
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the combiSensor KSH5 and is the answer not in the manual?
Questions and answers