Editing A Seam Sequence - DURKOPP ADLER 911-211-10 Operating Instructions Manual

Programming
The existing seam programs are displayed at the right side of the screen.
The
transferred to the seam sequence.
2. Press the desired seam program.
 The selected seam program is highlighted with a dark background.
3. Press the Insert button.
 The seam program is transferred to the seam sequence and is
4. Add further seam programs in the same manner.
Removing a seam program from a seam sequence
To remove a seam program from a seam sequence:
1. Press the seam program in the
 The seam program is removed from the seam sequence.
Assigning a name to a seam sequence
To assign a name to a seam sequence:
1. Press the Set name button.
 The window for entering the name of the seam sequence opens.
2. Enter the desired name and adopt the change by pressing
 The seam sequence is now available under this name for sewing,

5.10.5 Editing a seam sequence

You can edit an existing seam sequence by adding or removing seam
programs.
To edit a seam sequence:
1. Open the seam program you wish to modify via the menu items
 The seam sequence opens on the start screen.
2. Press the menu items
 The window for editing the seam sequence appears.
Operating Instructions 911-211-10 - 00.0 - 10/2020
Sequence field on the left shows which seam programs have been
displayed in the Sequence
the Delete button.
OK (CR) ( p. 43).
editing or copying.
File > Open .
field on the left side of the screen.
Sequence
Edit Sequence
>
field and then press
.
65