Thermo Scientific myECL Imager Manual page 71

66 ECL Imager User Manual
MY
3. To install an emission filter, insert the threaded side of the filter into an open
port on the filter wheel. Turn clockwise to screw the filter in place until hand
tight.
4. To remove an emission filter, grasp the outer edge of the filter housing and turn
counterclockwise to unscrew and remove.
5. When filter installation/removal is complete, turn the system power on.
6. Update the filter settings in the Tools menu. See Chapter 2: Imager for
directions on changing the filter settings.
Thermo Fisher Scientific