Thermo Scientific myECL Imager Manual page 44

39 ECL Imager User Manual
MY
5. The Total time is calculated and displayed as each new time is input into a cell.
After all desired exposure times are entered, select the Save button (former Edit
6.
button) in the top right corner of the table. This saves the User # time settings
for further uses. All five User # time settings are entered and saved the same
way.
7. Select the User # button to automatically capture the images.
8. Captured images are displayed on the touchscreen and stored in the Gallery for
further viewing and selection.
Thermo Fisher Scientific