Combined Sensor Initialization Procedure - Mazda MX-5 Miata Sport 2007 Manual

Fig. 16: Tilting Combined Sensor Left And Right
Courtesy of MAZDA MOTORS CORP.

COMBINED SENSOR INITIALIZATION PROCEDURE

WARNING:
1. Inspect the wheel alignment and inflation pressure.
If there is any malfunction, adjust the applicable part.

2. Park the vehicle on level ground.
3. Turn the ignition switch off.
4. Connect the M-MDS to the DLC-2.
2007 Mazda MX-5 Miata Sport
2007 BRAKES Dynamic Stability Control - MX-5 Miata
Unless the initialization procedure of the combined sensor is

completed, the DSC will not operate, causing an unexpected
accident. Therefore, always perform the initialization procedure to
ensure DSC operation if the combined sensor and DSC HU/CM have
been removed or replaced.