Mazda MX-5 Miata Sport 2007 Manual page 1047

Fig. 56: Installing CKP Sensor
Courtesy of MAZDA MOTORS CORP.
4. Install the CKP sensor fitting bolts.
Tightening torque
5.5-7.5 N.m {56-76 kgf.cm, 49-66 in.lbf}
5. Remove the SST then install the cylinder block lower blind plug.
Tightening torque
18-22 N.m {1.9-2.2 kgf.m, 14-16 ft.lbf}
6. Install in the reverse order of removal.
CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [LF]
1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
CAUTION:
2007 Mazda MX-5 Miata Sport
2007 ENGINE PERFORMANCE Engine Control System - MX-5 Miata
When replacing the camshaft position sensor, make sure there
