Table of Contents
Advertisement
Fig. 52: Tightening Sequence Of Camshaft Cap Bolts
Courtesy of MAZDA MOTORS CORP.
FRONT OIL SEAL REPLACEMENT [LF]
1. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF] .)
2. Remove the air cleaner. (See AIR CLEANER ELEMENT INSPECTION [LF] .)
3. Remove the drive belt. (See DRIVE BELT INSPECTION [LF] .)
4. Remove the under cover. (See TRANSVERSE MEMBER REMOVAL/INSTALLATION .)
5. Remove the front suspension tower bar. (joint)
6. Remove the ignition coil. (See IGNITION COIL REMOVAL/INSTALLATION [LF] .)
7. Remove the OCV connector.
8. Remove the cylinder head cover. (See TIMING CHAIN REMOVAL/INSTALLATION [LF] .)
9. Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR
REMOVAL/INSTALLATION [LF] .)
10. Remove in the order indicated in Fig. 53 .
11. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ENGINE Mechanical - MX-5
Advertisement
Table of Contents
Troubleshooting
