Fig. 34: Identifying Mark Around Retainer Installation Screws
Courtesy of MAZDA MOTORS CORP.
RETAINER ASSEMBLY NOTE
1. Install the retainers to the link, aligning the retainer marks with the retainer installation screws.
Fig. 35: Identifying Mark Around Retainer Installation Screws
Courtesy of MAZDA MOTORS CORP.
DETACHABLE HARDTOP ADJUSTMENT
TOP LOCK
1. Remove the spring.
2. Remove the snap ring. (See SNAP RING REMOVAL NOTE.) (See SNAP RING INSTALLATION
NOTE.)
3. Remove the pin.
4. Remove the screws.
5. Remove the cover.
6. Adjust the clearance of part A by rotating the adjustment nut.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Exterior Trim - MX-5 Miata