Type D Installation - Mazda MX-5 Miata Sport 2007 Manual

2. Reconnect the hose straight to the pipe until a click is heard.
3. Lightly pull and push the quick release connector a few times by hand, and then verify that it is connected
securely.

TYPE D INSTALLATION

NOTE:
If the quick release connector O-ring is damaged or has slipped, replace

the evaporative hose.
When replacing with a new evaporative hose, disengage the release tabs

from the join port.
A checker tab is integrated with the quick release connector for new

evaporative hoses. Remove the checker tab from the quick release
connector after the connector is completely engaged with the joint port.
2007 Mazda MX-5 Miata Sport
2007 ENGINE PERFORMANCE Emission System - MX-5 Miata