Mazda MX-5 Miata Sport 2007 Manual page 809

Fig. 7: Identifying Clip Groove End Of Rear Drive Shaft
Courtesy of MAZDA MOTORS CORP.
REAR DRIVE SHAFT INSTALLATION NOTE
1. Apply differential oil to the differential oil seal lip.
CAUTION:
2. Insert the rear drive shaft into the rear differential with the clip opening facing upward.
3. After installation, verify that the rear drive shaft is securely held by the clip by pulling the outer ring on
the differential side towards the axle.
LOCKNUT INSTALLATION NOTE
1. Tighten a new locknut.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Drive Shaft - MX-5 Miata
The sharp edges of the rear drive shaft can slice or puncture the

oil seal. Be careful not to damage the oil seal when installing
the rear drive shaft from the rear differential.