Mazda MX-5 Miata Sport 2007 Manual page 383

Fig. 6: Placing Alignment Mark On Brake Pipe & ABS HU/CM
Courtesy of MAZDA MOTORS CORP.
2. Apply protective tape to the connector to prevent brake fluid from entering.
3. Remove the brake pipe.
BRAKE PIPE (ABS HU/CM-BRAKE PIPE JOINT) INSTALLATION NOTE
1. Align with the mark made before removing the brake pipe and temporarily install the brake pipe to the
ABS HU/CM.
CAUTION:
2007 Mazda MX-5 Miata Sport
2007 BRAKES Antilock Brake System - MX-5 Miata
If the brake pipe is tightened to the specified torque, it may be

difficult to install it to the vehicle. Therefore, only temporarily
tighten the brake pipe so that it can still be moved.