NOTE:
3. Access PIDs for the switch you are inspecting.
4. Vibrate the sensor slightly with your finger.
If PID value is unstable or malfunction occurs, check for poor connection and/or poorly mounted
sensor.
Connector Terminal Check Method
1. Check the connection condition of each female terminal.
2. Insert male terminal; fit the female terminal side to female terminal and check to see whether the
malfunction is in the female terminal or not.
Fig. 4: Checking Connection Condition Of Female Terminal
Courtesy of MAZDA MOTORS CORP.
SYMPTOM TROUBLESHOOTING
SYMPTOM TROUBLESHOOTING CHART
No.
1 TPMS warning light illuminates continuously.
TPMS warning light (low pressure warning) illuminates after engine start and turns off after driving
2007 Mazda MX-5 Miata Sport
2007 SUSPENSION Symptom Troubleshooting - MX-5 Miata
If engine starts and runs, perform the following steps at idle.
Symptom