Mazda MX-5 Miata Sport 2007 Manual page 568

2006-08 TRANSMISSION Automatic Transmission Overhaul - MX-5 Miata & RX-8
Fig. 364: Identifying Breather Tube And Pipe
135. Using a flathead screwdriver, position the drive gear on the oil pump component in the center. Then
install the torque converter component to the transmission.
CAUTION:
136. To ensure that the torque converter is installed accurately, measure distance A between the end of the
torque converter and the end of the converter housing.
Distance A (between the end of the torque converter and the end of the converter housing)
26.2 mm {1.0 in}
2007 Mazda MX-5 Miata Sport
Do not damage the oil seal.

Do not drop the torque converter.

Fig. 365: Identifying Torque Converter