2007 ACCESSORIES & BODY, CAB Entertainment - MX-5 Miata
1. Remove the battery cover.
2. Disconnect the negative battery cable. See BATTERY REMOVAL/INSTALLATION [LF] .
3. Remove the lower panel. See LOWER PANEL REMOVAL/INSTALLATION .
4. Remove the knee bolster. See KNEE BOLSTER REMOVAL/INSTALLATION .
5. Remove the side wall. See SIDE WALL REMOVAL/INSTALLATION .
6. Check if the vehicle has the installation bolt or not at the position shown in the figure from the underside
of the driver seat
If the installation bolt is equipped, remove it.
CAUTION: The center panel unit may be damaged if it is pulled out with the
Fig. 2: Identifying Installation Bolt (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.
7. Remove in the order indicated in Fig. 3.
2007 Mazda MX-5 Miata Sport
installation bolt installed. Verify that the installation bolt is removed
before pulling out the center panel unit.