Mazda MX-5 Miata Sport 2007 Manual page 1065

Courtesy of MAZDA MOTORS CORP.
Open Circuit
If there is no continuity, there is an open circuit. Repair or replace the wiring harness.

KS terminal A and PCM terminal 2U

KS terminal B and PCM terminal 2V

Short Circuit
If there is continuity, there is a short circuit. Repair or replace the wiring harness.

KS terminal A and power supply

KS terminal A and body ground

KS terminal B and power supply

KS terminal B and body ground

BAROMETRIC PRESSURE (BARO) SENSOR INSPECTION [LF]
NOTE:
Before performing the following inspection, make sure to follow the

procedure as indicated in the troubleshooting flow diagram. (See
TROUBLESHOOTING PROCEDURE .)
1. Connect the M-MDS or equivalent to the DLC-2.
2007 Mazda MX-5 Miata Sport
2007 ENGINE PERFORMANCE Engine Control System - MX-5 Miata