Mazda MX-5 Miata Sport 2007 Manual page 453

2006-08 TRANSMISSION Automatic Transmission Overhaul - MX-5 Miata & RX-8
Fig. 130: Removing Snap Ring (C3) From C2, C3 Clutch Drum
26. Using a flathead screwdriver, remove the snap ring (C2) from the C2, C3 clutch drum.
Fig. 131: Removing Snap Ring (C2) From C2, C3 Clutch Drum
27. Remove the retaining plate (C2) and the drive plate (C2) and the driven plate (C2) from the input shaft
component.
Fig. 132: Identifying Retaining Plate, Drive And Driven Plate
28. Install the SST as shown in the figure, and compress the C2 clutch piston return spring.
CAUTION:
2007 Mazda MX-5 Miata Sport
Be careful not to expand the snap ring too much.
