Mazda MX-5 Miata Sport 2007 Manual page 925

Fig. 12: Identifying Charcoal Canister
Courtesy of MAZDA MOTORS CORP.
EVAPORATIVE EMISSION (EVAP) SYSTEM LEAK DETECTION PUMP
REMOVAL/INSTALLATION [LF]
1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
3. Disconnect the EVAP system leak detection pump connector.
4. Disconnect the evaporative hose from the EVAP system leak detection pump.
5. Cover the evaporative hose with vinyl sheets or the like to prevent them from being scratched or
contaminated with foreign material.
6. Remove the EVAP system leak detection pump with the bracket.
2007 Mazda MX-5 Miata Sport
2007 ENGINE PERFORMANCE Emission System - MX-5 Miata