Mazda MX-5 Miata Sport 2007 Manual page 541

2006-08 TRANSMISSION Automatic Transmission Overhaul - MX-5 Miata & RX-8
Identification mark Thickness (mm {in})
0
1
2
3
CAUTION:
47. Install the drive plate, driven plates and retaining plate to the transmission component as shown in the
figure.
Fig. 307: Identifying Drive Plate, Driven Plates And Retaining Plate
48. Install the driven plates, drive plate, and the retaining plate in the order indicated in the figure.
49. Install the bearing race and thrust needle bearing to the middle planetary gear component.
Fig. 308: Identifying Driven Plates, Drive Plate And Retaining Plate
50. Install the middle planetary gear component and sun gear.
51. Apply ATF to the bearing race and thrust needle bearing.
52. Install the bearing race and thrust needle bearing to the middle planetary gear component.
2007 Mazda MX-5 Miata Sport
1.95-2.05 {0.077-0.081}
2.15-2.25 {0.085-0.089}
2.35-2.45 {0.093-0.096}
2.55-2.65 {0.100-0.104}
Inspect the number and order of the retaining plate, drive and

driven plates.