Mazda MX-5 Miata Sport 2007 Manual page 353

Fig. 52: Connecting SSTs (Deployment Tool) To SSTs (Adapter Harness)
Courtesy of MAZDA MOTORS CORP.
10. Press the activation switch on the SST (Deployment tool) connected with 49 L066 002 (a yellow
connector) of the SST (Adapter harness), and after 3 s , press the activation switch on the other SST
(Deployment tool) to operate (deploy) the air bag module (both inflators).
WARNING:
2007 Mazda MX-5 Miata Sport
2007 RESTRAINTS Air Bag System - MX-5 Miata
Verify that air bag module operation (explosive) sound occurs

twice. If no operation (explosive) sound was heard or a single
operation (explosive) sound was heard, both inflators would
not have operated (deployed) properly. This may cause serious
injury if the air bag module operates (deploy) unexpectedly. If
the two operation (explosive) sounds are not heard, perform
Step 8 again. If a total of two operation (explosive) sounds
cannot be verified even though Step 8 is performed again,
leave the air bag module alone for 30 min or more before
approaching it again.
The air bag module is very hot immediately after it is operated

(deployed). You can be burned. Do not touch the air bag
module for at least 15 min after deployment.