Mazda MX-5 Miata Sport 2007 Manual page 806

Fig. 4: Suspending Brake Caliper Component
Courtesy of MAZDA MOTORS CORP.
2. Temporarily tighten the wheel nut to prevent the disc plate from falling off.
REAR DRIVE SHAFT REMOVAL NOTE
1. Temporarily install a spare nut to the end of the rear drive shaft.
2. Knock the nut with copper hammer lightly and remove the rear drive shaft from the wheel hub.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Drive Shaft - MX-5 Miata