Fig. 47: Identifying Side Step Molding Components
Courtesy of MAZDA MOTORS CORP.
FRONT UNDER COVER REMOVAL/INSTALLATION
1. Remove the splash shield A. (See SPLASH SHIELD REMOVAL/INSTALLATION.)
2. Remove the bolts A at section A shown in the figure.
3. Remove the bolts B at section B shown in the figure.
4. Remove the fasteners C at section C shown in the figure.
5. Remove the front under cover.
6. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Exterior Trim - MX-5 Miata