Table of Contents
Advertisement
Fig. 7: Identifying Drip Molding Components
Courtesy of MAZDA MOTORS CORP.
CONVERTIBLE TOP REMOVAL/INSTALLATION
1. Cover both sides of the rear window glass with thick cloth to protect the window.
2. Remove the following parts:
1. Console (See CONSOLE REMOVAL/INSTALLATION .)
2. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION .)
3. Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION .)
4. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
5. Aeroboard (See AEROBOARD REMOVAL/INSTALLATION .)
6. Front seat back bar garnish (See SEAT BACK BAR GARNISH
REMOVAL/INSTALLATION .)
7. Back trim (See BACK TRIM REMOVAL/INSTALLATION .)
8. Seat belt set plate (See SEAT BELT REMOVAL/INSTALLATION .)
9. Seat back crossmember assembly (See SEAT BACK CROSSMEMBER ASSEMBLY
REMOVAL/INSTALLATION .)
10. Rear side trim (See .)
11. Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
12. Side shelf (See .)
13. Seat belt upper anchor installation bolt (See SEAT BELT REMOVAL/INSTALLATION .)
3. Disconnect the rear window defroster connector.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Exterior Trim - MX-5 Miata
Advertisement
Table of Contents
Troubleshooting
