Mazda MX-5 Miata Sport 2007 Manual page 1221

3. Peel off the end of the double-sided adhesive tape (1), (2), and (3), and attach the windshield garnish side
to the position shown in the figure.
Clearance
a: 0.3-1.7 mm {0.012-0.066 in}
Fig. 31: Position For Attaching Double-Sided Adhesive Tape On Windshield Garnish
Courtesy of MAZDA MOTORS CORP.
4. Peel off the tape backing from the double-sided adhesive tape (1), (2), and (3), and attach it to the vehicle.
5. Peel off the end of the double-sided adhesive tape (4) and (5), and attach it to the position shown in the
figure.
6. Peel off the tape backing from the double-sided adhesive tape (4) and (5), and then adhere the windshield
garnish side.
7. Peel off the end of the double-sided adhesive tape (6) and attach the windshield garnish center to the
position shown in the figure.
Clearance
a. a: 0.3-1.7 mm {0.012-0.06 in}
b. b: -0.3-2.3 mm {-0.012-0.090 in}
c. c: 0.0-0.7 mm {0.00-0.027 in}
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Exterior Trim - MX-5 Miata