Mazda MX-5 Miata Sport 2007 Manual page 637

1. Jack up the front of the vehicle and support it with safety stands.
2. Remove the wheel and tires.
3. Verify the remaining thickness of the pads.
Minimum front disc pad thickness
2.0 mm {0.079 in} min.
4. Replace the pads as a set (right and left wheels) if either one is at or less than the minimum thickness.
Fig. 33: Inspecting Disc Pad Thickness
Courtesy of MAZDA MOTORS CORP.
FRONT BRAKE (DISC) REMOVAL/INSTALLATION
1. Remove in the order indicated in Fig. 34 .
2. Install in the reverse order of removal.
3. After installation, depress the brake pedal a few times, then verify that the brakes do not drag.
2007 Mazda MX-5 Miata Sport
2007 BRAKES Conventional Brake System - MX-5 Miata