Mazda MX-5 Miata Sport 2007 Manual page 932

Fig. 18: Identifying PCM Wiring Harness-Side Connector
Courtesy of MAZDA MOTORS CORP.
PURGE SOLENOID VALVE REMOVAL/INSTALLATION [LF]
1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
3. Disconnect the purge solenoid valve connector.
4. Disconnect the vacuum hose from the purge solenoid valve.
5. Remove the purge solenoid valve from the air hose.
2007 Mazda MX-5 Miata Sport
2007 ENGINE PERFORMANCE Emission System - MX-5 Miata