Replacing The System Cover; Checking The Equipment; Troubleshooting The Keyboard - Dell PowerEdge 2500 Installation And Troubleshooting Manual

Hide thumbs Also See for PowerEdge 2500:
Table of Contents

Advertisement

 

Replacing the System Cover

1.  Check that no tools or parts are left inside the system.
2.  Fit the cover over the sides of the chassis, and slide the cover forward.
3.  Secure the cover with the three thumbscrews.
4.  Close the front bezel.

Checking the Equipment

This section provides troubleshooting procedures for equipment that connects directly to the I/O panel of the system, such as the monitor, keyboard, or mouse. Before
you perform any of the procedures, see
Troubleshooting the Video Subsystem
Problem
Monitor
l
Monitor interface cable
l
Video memory
l
Video logic
l
Action
1.  Check the system and power connections to the monitor.
2.  Run the video tests in the Dell Diagnostics.
If the tests run successfully, the problem is not related to video hardware. Go to
If the tests did not run successfully see

Troubleshooting the Keyboard

Problem
A system error message indicates a keyboard problem
l
Action
1.  Look at the keyboard and the keyboard cable for any signs of damage.
"External
Connections."
"Getting
Help" for instructions on obtaining technical assistance.
"Finding Software
Solutions."

Advertisement

Table of Contents
loading

Table of Contents