Program Overview; Messages (Main Menu 1) - Swan Analytical Instruments AMI Codes-II TC Operator's Manual

AMI Codes-II TC

Program Overview

8.
8.1.
Pending Errors
1.1*
Maintenance List
1.2*
Message List
1.3*
74
Program Overview
For explanations about each parameter of the menus see
List and Explanations, p.
 Menu 1 Messages informs about pending errors and mainte-
nance tasks and shows the error history. Password protection
possible. No settings can be modified.
 Menu 2 Diagnostics is always accessible for everybody. No
password protection. No settings can be modified.
 Menu 3 Maintenance is for service: Calibration, simulation of
outputs and set time/date. Please protect with password.
 Menu 4 Operation is for the user, allowing to set limits, alarm
values, etc. The presetting is done in the menu Installation
(only for the System engineer). Please protect with password.
 Menu 5 Installation: Defining assignment of all inputs and
outputs, measuring parameters, interface, passwords, etc.
Menu for the system engineer. Password strongly recom-
mended.

Messages (Main Menu 1)

Pending Errors
Maintenance List
Number
Date, Time
80.
1.1.5*
1.2.5*
1.3.1*
Program
* Menu numbers
A-96.250.631 / 280219