Table of Contents
Advertisement
Interfaces
4.5.3
Sine Encoder with EnDat or HIPERFACE (X1)
As an option, our servomotors can be fit with a single-turn or multiturn sine-cosine encoder. Pre-
ferred types are ECN1313 and EQN1325.
This encoder is used by the AX2000 as a feedback device for drive tasks which require highly pre-
cise positioning or extremely smooth running.
If lead lengths of more than 50m are planned, please consult our customer service.
The thermostat contact in the motor is connected via the encoder cable to the AX2000 and evalu-
ated there.
Encoder types with a power consumption of more than 150mA can also be connected using our
external power supply (ð p. 89). For encoders that do not have integrated terminating resistors, we
offer an optional terminating adapter (ð p.
Frequency limit (A, B): 250 kHz.
42
02/06
89).
- A.4.031.1/27
SubD1
AX2000
17pol.round
AX2000 Installation manual
BECKHOFF
Advertisement
Table of Contents
