MS6(N)−SV
4
Mechanical/pneumatic installation
Mechanical
Note
Information about fitting module connectors, sub−bases and mounting brackets
can be found in the operating instructions enclosed with the relevant
accessories.
Place the MS6(N)−SV as close as
S
possible to the location where it will
be used.
Place the MS6(N)−SV so that you will
S
have sufficient space to connect the
multi−pin plug socket and the
silencer (è Fig. 2 with a UOS−1
silencer from Festo).
Observe the minimum permissible
S
distance from the wall of 32 mm
(è Fig. 2).
If using the MS6−WPB mounting
bracket from Festo, this minimum
distance is guaranteed.
It can be fitted in any position.
S
Note the direction of flow from
S
1 to 2.
The numbers 1 on the product
housing serve as a guide (è Fig. 3).
40
Fig. 2
Fig. 3
Festo MS6(N)−SV 0904a English
1