Mechanical/Pneumatic Installation; Mechanical - Festo MS6-SV Operating Instructions Manual

MS6−SV
4

Mechanical/pneumatic installation

Mechanical

Note
Information about fitting module connectors, sub−bases and mounting brackets can
be found in the operating instructions enclosed with the relevant accessories.
Place the MS6−SV as close as
S
possible to the location where it
will be used.
Place the MS6−SV so that you will
S
have sufficient space to connect
the multi−pin plug socket and the
silencer (è Fig. 2 with a UOS−1
silencer from Festo).
Observe the minimum permissible
S
distance from the wall of 36 mm
(è Fig. 2).
If using the MS6−WPB mounting
bracket from Festo, this minimum
distance is guaranteed.
The device can be fitted in any
S
position.
Note the direction of flow from
S
1 to 2.
The numbers 1 on the product
housing serve as a guide (è Fig. 3).
32
Fig. 2
Fig. 3
Festo MS6−SV 0706NH English
1