Receipt Options; Receipt Banner; Preprint Receipt; Receipt Delay - Ingenico iCT250 Merchant Manual

Receipt options
Use these options to configure your receipts.
• Receipt banner
• Preprint receipt
• Receipt delay
• Receipt order

Receipt banner

This option allows you to add a short slogan or advertising to the bottom of all receipts printed from a terminal.
• The receipt banner must be added to each terminal that you want to use it on.
• The more lines you add to the banner, the more paper will be used when you print a receipt. If you print a large number of receipts
daily, your paper usage may be significantly higher than what you're accustomed to.
• It's your responsibility to ensure that the content of any banner message complies with all applicable laws. By using this feature, you
agree that you are solely responsible for any advertising messages displayed on the terminal.
1. P ress / Admin key  Setup Menu  Customization  Receipt Options  Receipt
. , # *
2. E nable the receipt banner (Yes or No).
3. nter the number of lines to print on the receipt (1 –
E
receipt banner.
4.
S elect the font
S ingle size can have 26 characters to a line and double will allow 20 characters.
5. E nter the text for the displayed line and when finished press OK. See the References section at the end of this
document for help entering alpha-numeric characters.
I f you press OK without entering anything, the line will be left blank.
6. G o to step 5 for each line in your receipt banner. When you press OK after the final line, your changes are
saved and will be applied to all future receipts.

Preprint receipt

Use this option to preprint part of the receipt while the terminal sends the financial transaction details to be verified by
the financial servers.
1. / Admin key  Setup Menu  Customization  Receipt Options and
P ress . , # *
2.
E nable the preprint option (Yes or No). The default is off.
3. Preprint is now enabled/disabled.

Receipt delay

Use this option to add a time delay between printing receipt copies.
1. P ress / Admin key  Setup Menu  Customization  Receipt Options  Receipt
. , # *
2.
E nter the time
OK. The default delay is three seconds.
3.
The time delay is set.

Receipt order

Use this option to decide which receipt prints first, merchant or customer.
1. P ress / Admin key  Setup Menu  Customization  Receipt Options  Receipt
. , # *
2. S elect which receipt prints first (Merchant or Customer). By default the merchant receipt prints first.
3.
The receipt order is set.
size for the displayed line (Single or Double).
delay between printing the merchant and the customer receipts (1 to 99 seconds) and press
• Reprint last customer receipt
• Reprint last receipt
• Reprint older receipt
9) and press OK. If you set it to zero it will disable the
- 28 -
Banner.
Preprint.
Delay.
Order.