Reprint Last Customer Receipt; Reprint Last Receipt; Reprint Older Receipt; Transaction Options - Ingenico iCT250 Merchant Manual

Reprint last customer receipt

This transaction is used to reprint the last customer receipt before another transaction is processed. This is a quick way to
reprint the last customer receipt. If you need to reprint a merchant receipt see the transaction below.
1. Press 0 key.
2. C onfirm you want to reprint the last receipt (Yes or No).
3. The last customer receipt reprints.

Reprint last receipt

This option is used to reprint the last merchant or customer receipt before another transaction is processed.
1. P ress . , # * / Admin key  Reprint Menu  Reprint
2. S elect which receipt is to be reprinted (1 – Merchant Copy, 2 – Customer Copy or 3 – Both).
3. The last receipt reprints.

Reprint older receipt

This option is used to reprint a receipt printed before the last receipt since the last end of day close.
1.
P ress . , # * / Admin key  Reprint Menu  Reprint
2.
S elect how you would like to look up the receipt by (1 – All, 2 – Operator ID, 3 – Invoice #, 4 – Account # or 5
– Approval Code).
» All – Select the transaction that you want to reprint the receipts for.
» Operator
» Invoice
»
A ccount
» Approval
3.
S croll to the desired transaction (if there is more than one) and press OK.
4.
Confirm this is the correct receipt (Yes or No).
5. S elect which receipt is to be reprinted (1 – Merchant Copy, 2 – Customer Copy or 3 – Both).
6. The selected receipt or receipts reprint.
Transaction options
Use these options to fine tune your terminal to perform transactions exactly how you want it to.
• Card present
• Duplicate transaction check

Card present

This option displays a screen that allows the user to indicate whether a card is present or not for a manually entered
transaction.
1. P ress . , # * / Admin key  Setup Menu  Customization  Transaction Prompts  Card
2. S elect the desired option (On or Off). The default setting is off.
3. The card present feature is enabled/disabled.

Duplicate transaction check

This option is a form of security against accidentally entering the same credit card transaction into the terminal twice. If
the terminal detects an identical transaction being performed, it will raise a flag and ask you whether you wish to
proceed.
1. / Admin key  Setup Menu  Customization  Transaction Options  Duplicate trans
P ress . , # *
2.
S elect the desired option (On or Off). The default setting is off.
3. Duplicate transaction check is enabled/disabled.
ID – Enter the Operator ID and press OK.
Number – Enter the Invoice Number and press OK.
# – Swipe the card used to make the sale or enter the card account number and press OK.
Code – Enter the Approval Code and press OK.
TD iCT250 Merchant Guide
Administration and Configuration
Last.
Previous.
• Partial authorization
• Transaction limit
- 29 -
5
Present.
Check.