Connection Of Shielding - gefran ADV200 Series Quick Start Up Manual, Specification And Installation

5.1.2 Connection of shielding

•
Fasten the metallic support (A), for shielding of the power section, in the two hous-
ings (B) and secure with the two screws + washer provided (C).
Fasten the shield of the cables to the omega sections (D).
•
For these sizes the metal support (A) is not provided. Cable shielding must be
provided by the installer.
Connection of shielding inside a cabinet
The motor connection cable must be shielded inside a cabinet. The figure shows
two examples.
28
Sizes 1...5
C
D
A
Sizes ≥ 6
ADV200 • Quick start up guide
B
D