Welch Allyn VSM 6000 series Directions For Use Manual page 72

66 Patient monitoring
Start program intervals
Follow these steps to configure the monitor to take automatic NIBP measurements at variable
intervals.
1. Properly size the blood pressure cuff and position it around the patient's bare upper arm.
2. On the Home tab, touch
3. Select Program.
4. Touch the desired program.
5. Touch Start intervals.
Create a new program interval or edit an existing program
Follow these steps to create or edit a program interval.
1. On the Home tab, touch the interval button (
2. Select Program.
3. Touch the desired program.
4. Touch the keyboard icon and enter the desired program name.
5. Enter the desired duration and interval settings.
6. Touch Start Intervals.
The new intervals take effect at the start of the next NIBP measurement.
Stat intervals
You can configure the monitor to take NIBP measurements continuously.
Welch Allyn Vital Signs Monitor 6000 Series™
.
or ).