Welch Allyn VSM 6000 series Directions For Use Manual page 36

30 Navigation
• Time and date. Touch this area to navigate to date and time settings.
• Connection status (wired or wireless). The icons indicate which connection type, if any, is
currently active.
Icon
Blank
• Process indicator. This indicator appears when system or patient data is transferred between
the monitor and the network.
• Battery condition. Estimated battery capacity is displayed in hour(s):minute(s) format.
This area also provides:
• Interactive alarm and information messages.
• Shortcuts to some setting controls. For example, touching the Alarm icon displays the Alarms
tab.
Battery status
The battery status indicator displays the state of the battery.
The battery status is represented by icons in the right corner of the Device Status area:
• The monitor is connected to a power outlet and the battery is charging or is fully charged. The
estimated charge rate is displayed as a percentage of capacity.
• The monitor is not connected to a power outlet and is running on battery power. The estimated
charge time remaining is displayed in the hour(s):minute(s) format. Each section of the battery
status indicator represents a percentage of remaining charge.
• The monitor is connected to a power outlet but the battery does not maintain a charge (or has
been removed).
When the battery is not being recharged and power becomes low, an information message
displays in the Device Status area.
Connection type
Ethernet
USB
Wireless
No connection
Welch Allyn Vital Signs Monitor 6000 Series™